| Go to Bottom |
View previous topic :: View next topic |
| Author |
Message |
mopedsRfun
Net Rider
Joined: 06 Apr 2012
Location: yaaaa
|
 Posted: Mon Apr 09, 2012 8:19 pm Post subject: Kick starter Problems |
 |
|
Hello i have a 2006 MT50QT 4 stroke 49.49cc moped/scooter.
It has 12'' Rims the engine block is stamped with a "MT139QMB"
The moped/scooter is built by Shanghai Meitian Motorcycle Co. in china.
today the kick starter seized up. I had flooded the engine earlier that day so i was trying to kick it over for like 10 minutes trying to get it started. Must have worn something out side the kick start case. so this site has a whole replacement kit for the kick start.
Heres the description - Hot swap assembled belt cover
"How cool is this? Completely assembled belt cover with all the kick start components already installed for you. Great for shops wanting to save labor time, or the backyard mechanic wanting to save aggravation. Includes lever, shaft, idler gear, springs, etc. Cost of this assembly is less than the sum of all the parts in total! $74.95 Comes in long and short case.
choose your length"
there are 2 options for the Hot swap assembled belt cover i am looking to purchase. One is "Short Case" , and the other is "Long Case"
could any one tell me which one i need, i can provide pictures of my moped/scooter if necessary.
_________________
ya dude ya!!!
Last edited by mopedsRfun on Mon Apr 09, 2012 8:20 pm; edited 1 time in total |
|
| Back to top |
|
 |
John
Master Regional Rider
Joined: 18 Nov 2003
Location: Caledonia, Ontario, Canada
|
| Posted: Tue Apr 10, 2012 7:13 am Post subject: re: Kick starter Problems |
|
|
You have a SCOOTER not a moped by definition, so moving it to the appropriate place.
_________________
John
"Plan your life like you will live forever, and live your life like you will die the next day!" |
|
| Back to top |
|
|
mopedsRfun
Net Rider
Joined: 06 Apr 2012
Location: yaaaa
|
| Posted: Tue Apr 10, 2012 10:07 am Post subject: Re: re: Kick starter Problems |
|
|
| John wrote: |
| You have a SCOOTER not a moped by definition, so moving it to the appropriate place. |
oh i sorry
can any one help me with my scooter problem please?!!!??!?!?!?!?!?!?!
_________________
ya dude ya!!! |
|
| Back to top |
|
|
mountainmoped
Master Regional Rider
Joined: 14 Nov 2003
Location: Northern Georgia
|
| Posted: Wed Apr 11, 2012 10:52 am Post subject: re: Kick starter Problems |
|
|
10 inch rear wheel= short case
12 inch rear wheel= long case
If nothing in cover is broken there is no reason to replace anything.
_________________
Bryan
Last edited by mountainmoped on Wed Apr 11, 2012 10:53 am; edited 1 time in total |
|
| Back to top |
|
|
mopedsRfun
Net Rider
Joined: 06 Apr 2012
Location: yaaaa
|
| Posted: Wed Apr 11, 2012 11:52 am Post subject: Re: re: Kick starter Problems |
|
|
| mountainmoped wrote: |
10 inch rear wheel= short case
12 inch rear wheel= long case
If nothing in cover is broken there is no reason to replace anything. |
ok thank you, a small piece of the actual cover broke (i think it was a piece that the kick starter spring rest against)
Do you know if a gy6 150 long case will bolt up to my scooter?
_________________
ya dude ya!!! |
|
| Back to top |
|
|
mountainmoped
Master Regional Rider
Joined: 14 Nov 2003
Location: Northern Georgia
|
| Posted: Wed Apr 11, 2012 3:18 pm Post subject: re: Kick starter Problems |
|
|
GY6 cover won't work on a 139.
_________________
Bryan |
|
| Back to top |
|
|
|
FAQ
Rules
Search
Register
Profile
Log in to check your private messages
Log in
Moped Forums
Moped Repair
MRA Store
Calendar
