crankshaft install tool?

A place within the MRA for scooter enthusiasts to exchange information.

Moderators: ItsLookingUp, pehuskey, Tab, mountainmoped, JD, John

crankshaft install tool?

Postby oilyhans » Sat Apr 08, 2006 8:17 pm

hey does anybody know where a guy can buy a universal
crank install tool? the kind i've seen in the manuals is not available
from the dealers& part houses.
thanks,
oilyhans
oilyhans
Net Rider
 
Posts: 361
Joined: Sat Nov 26, 2005 9:23 pm
Location: 30 miles north of seattle

re: crankshaft install tool?

Postby DickW » Mon Aug 09, 2010 9:07 pm

I was online at scrappydogscooters and saw these tools listed. You will need two, a right hand thread and a left hand thread. They seemed to be priced right. Also got a lot of very good tips on mechanical workiings of the GY6 engines. I intend to order these when I find what all else is needed to fix mine. Also, somewhere I read that an impact wrench will often remove the nuts. Good Lock.
DickW
Net Rider
 
Posts: 3
Joined: Sun Aug 08, 2010 2:41 pm
Location: Boise, Idaho

re: crankshaft install tool?

Postby oilyhans » Tue Aug 10, 2010 11:10 am

i ended up making my own crankshaft puller(s)
its easy use some all thread and a bar with some holes
drilled in it along with some large washers & nuts that fit on the all thread

oilyhans
Adly, TGB & TNG Scooters
MRP Racing Parts
Fulmer Helmets
Kelly Blue Book Contributor on Scooter prices
http://whidbeyislandmoped.com/
http://whidbeyislandmoped.com/cart
oilyhans
Net Rider
 
Posts: 361
Joined: Sat Nov 26, 2005 9:23 pm
Location: 30 miles north of seattle

re: crankshaft install tool?

Postby Ryan C » Mon Apr 11, 2011 3:46 pm

Image
only tool you need. crank will drop in.
Built not bought
Ryan C
Net Rider
 
Posts: 6
Joined: Sun Dec 05, 2010 10:15 am
Location: Apple Valley CA.

re: crankshaft install tool?

Postby the duck » Tue Apr 12, 2011 1:45 am

I use an impact wrench tog et the nuts off mine.
the duck
Net Rider
 
Posts: 7
Joined: Wed Mar 30, 2011 8:40 am
Location: Durham, England

re: crankshaft install tool?

Postby mountainmoped » Wed Apr 13, 2011 9:47 pm

MDI in Norcross, GA has them in stock. I will be there Friday picking up some parts.
Bryan
User avatar
mountainmoped
Master Regional Rider
 
Posts: 1834
Joined: Fri Nov 14, 2003 9:12 pm
Location: Northern Georgia

re: crankshaft install tool?

Postby oilyhans » Thu Apr 14, 2011 9:53 am

all you need is all thread and a couple of nuts and a piece of flat bar .
about $8 of hardware.....

oilyhans
Adly, TGB & TNG Scooters
MRP Racing Parts
Fulmer Helmets
Kelly Blue Book Contributor on Scooter prices
http://whidbeyislandmoped.com/
http://whidbeyislandmoped.com/cart
oilyhans
Net Rider
 
Posts: 361
Joined: Sat Nov 26, 2005 9:23 pm
Location: 30 miles north of seattle

re: crankshaft install tool?

Postby mountainmoped » Thu Apr 14, 2011 4:18 pm

They have all these tools in stock and they are inexpensive. They only sell to dealers tho.
http://www.mwiparts.com/pppp1.php?id=205
Bryan
User avatar
mountainmoped
Master Regional Rider
 
Posts: 1834
Joined: Fri Nov 14, 2003 9:12 pm
Location: Northern Georgia

re: crankshaft install tool?

Postby oilyhans » Fri Apr 15, 2011 11:06 pm

great link, thanks

oilyhans
Adly, TGB & TNG Scooters
MRP Racing Parts
Fulmer Helmets
Kelly Blue Book Contributor on Scooter prices
http://whidbeyislandmoped.com/
http://whidbeyislandmoped.com/cart
oilyhans
Net Rider
 
Posts: 361
Joined: Sat Nov 26, 2005 9:23 pm
Location: 30 miles north of seattle


Return to Scooter Riders

Who is online

Users browsing this forum: No registered users and 3 guests

cron